|Coastal Powder Coatings,
Inc., located in Palm City, FL., is a state
of the art E.S.P. (Electrostatic Spray Painting)
facility and was designed and constructed to provide an exceptional
level of quality and to handle the painting of products that
other facilities cannot. We are able to paint almost any item,
and our facility caters to and welcomes the Southeast’s
finest aluminum railing manufacturers and architectural metal
Our conveyor line can accommodate railing and other fabrications
that are up to 23’ in length and up to 8’
high, and returns up to 5’. We also have
a second track that can be used to coat products up to 43’
in length and 9’ in height. We are the only
facility in South and Central Florida specifically engineered
to handle these products.
aluminum is not properly pretreated, the paint will not
adhere no matter how high the quality of the paint.
Coastal Powder Coatings, Inc. uses a six
stage, chrome phosphate conversion pretreatment process
to ensure the highest quality finish. The product is first
sprayed with a concentrated, acidic cleaner to clean, degrease
and etch the surface. Then it is sprayed with a acidic treatment
to deoxidize, de-smut, and further etch the surface to receive
the coating. It is then rinsed with pure water treated through
our reverse osmosis, ultraviolet, multi-stage filtration
process. Then it is sealed with a chrome phosphate conversion
coating to eliminate oxidation for optimal paint adhesion,
with a final rinse of pure deionized water.
The product then enters our unique drying oven that forces
hot air from the bottom of the oven. The air is turned every
six minutes in a convection process that allows consistent
airflow over the entire product and prevents the heat from
simply rising to the top of the oven. The automated line
allows the product to remain untouched throughout the process,
eliminating the possibility of contamination and non-adhesion
of the paint. Once dried, the product continues to the spray
E.S.P. guns are used to coat the product. Coastal Powder
Coatings, Inc. offers 24 standard colors and a virtually
unlimited array of custom colors to suit any need. Our standard
paints are super-durables with five year durability. In
addition, we will offer high-performance fluoropolymer thermosetting
resin coatings with 5-10 year durability, which are excellent
for the highly corrosive coastal environments of
Florida. Coastal Powder Coatings, Inc. provides
warranties at an additional cost. Warranties must
be requested at the time the order is placed.
After coating, the product enters the baking oven, which
is capable of heating to 500 F. Upon completion of the baking
process, the painted product is wrapped for customer pickup.
Instead of standard bubble-wrap, we use 3/16” foam
to wrap the top cap so that damage will not occur in transit.
Our hours of operation are 6:00 am to 5:30 pm.
Please contact Frank Poma at 772-283-5311 for pricing or
to schedule an onsite visit of our facilities. We look forward
to providing your company with unparalleled service and
quality for all your finish needs.
has met the stringent criteria of the AAMA 2604-05
specification (American Architectural Manufacturers
Association) by successfully passing South Florida
outdoor weathering tests. As a result, Coastal
Super-Durable offers 5-Year durability.
offers superior mechanical properties, has a harder
finish and resists scratching and marring during fabrication,
assembly, and installation.
COASTAL FLUOROPOLYMER THERMOSETTING
Thermosetting Resin is a thermosetting
powder coating in which 100% of the resin system
consists of fluorocarbon polymers that have been
successfully used for more than 30 years in the
architectural market. This superior product line
consists of engineered formulations to exceed the
performance and durability requirements of the top
architectural specifications such as AAMA 2605-05
Voluntary Specifications Performance Requirements
and Test Procedures for Superior Performing Organic
Coatings on Aluminum Extrusions and Panels. Coastal
Fluoropolymer Thermosetting Resin has a
5 Year durability rating for single coat. Or a 10
Year durability rating for a two coat.
Thermosetting Resin offers superior
mechanical properties, has a harder finish and resists
scratching and marring during fabrication, assembly,
and installation. With a few expectations
for high chromatic colors, this premium
coating only requires a one coat application contributing
to greater efficiency when compared to a PVDF two-coat
POWDER is a Certified Applicator by
the following companies:
Coastal Standard Colors - Click Here
Us Today: (772) 283-5311
Powder Coatings, Inc.
2049 SW Poma Drive
Palm City, Fl 33990
Phone – 772-283-5311
Fax – 772-283-7540
Top of Page